Short description

The CDC 1651F-E is a pin-compatible mask ROM derivative of Micronas’ 16-bit Car Dashboard Controller family based on a WDC 65C816 CPU core.

The CDC 1651F-E offers 4 Kbytes of RAM and 128 Kbytes of ROM and 2 Kbytes of Special Function ROM. The device can be operated with an external quartz, at clock frequencies from 4 to 12 MHz. Communication is possible via one FullCAN module according to Bosch specification V2.0B. Only one single 5 V power supply is needed. Two low-power modes are available to reduce power consumption significantly.

The device also contains the patented built-in ERM (EMI Reduction Module).

top
Block diagram

System Architecture

The Car Dashboard Controller CDC 1651F-E contains a WDC 65C816 processor which operates at a maximum clock frequency of 12 MHz. An internal RC oscillator can provide an alternative clock signal to the RTC during power saving modes.

All I/O ports have multiple functions to obtain utmost flexibility. A total of 85 GPIOs can be selected.

The built-in ERM delivers superb EMI results reducing the peak values by up to 10 dBmV.

The CDC 1651F-E is fully pin- and software compatible to all other members of the CDC 16xyF family.

zoom Block diagram of the CDC 1651F-E
top
Features

Main Features

  • 128 Kbytes Mask ROM
  • 4 Kbytes SRAM
  • 2 Kbytes Special Function ROM
  • Three CPU operation modes (Fast, Slow, Deep Slow)
  • Two low-power modes (Idle and Wake)
  • RTC delivering hours, minutes, seconds
  • Polling/Flash timer output
  • 4- to 12-MHz oscillator
  • EMI reduction module (ERM)
  • Digital watchdog
  • Central clock divider
  • Interrupt controller with 16 inputs and 16 priority levels
  • Four port interrupts
  • Regulator input supervision for reset/alarm (alarm comparator)
  • Clock and supply supervision
  • 9-channel 10-bit ADC
  • One comparator
  • 48×4 LCD module
  • DMA
  • Two UARTs
  • Two SPIs
  • One CAN module with 256 bytes of object RAM according to Bosch specification V2.0B (16 message objects)
  • Five stepper motor drivers
  • Five PWM modules
  • Sound generator with auto decay
  • Two SW-selectable clock outputs
  • 16-bit free-running counter with three capture/compare modules
  • Patch module (up to 10 cells)
  • 1×16-bit timer and 2×8-bit timer
  • −40 to +105 °C case temperature range
  • Single 5 V supply voltage
  • Up to 85 GPIOs
  • 100-pin PQFP package, 0.65 mm pin pitch
top
Tools

Development Tools

  • Evaluation chip CDC 1605F-E featuring ROM/Flash emulation with external RAM (up to 16 Mbyte)
  • Emulator and POD with analyzer or trace functionality from 3rd party vendor
  • Application Board (APB) for Flash memory programming
  • Software environment (compiler, linker, assembler) from 3rd party vendors
  • RTOS from 3rd party vendors
zoom Development tool setup
top
 
HAL 82x
Function of the HAL 730 exemplified by the Window lift

Latest Brochure

Annual Report

Share Chart - Intraday

Share Chart
Shareholders' Meeting

Next Event with Micronas

Next Event

Find your local Micronas contact

Find Micronas products

or text on micronas.com