Product Family

HAL® 880

Programmable Linear Hall-Effect Sensors

HAL 880 (your choice)

Gehäuse: TO92UT
Ordering Code: HAL 880UT-K
Interface : Analog, 3-Wire
Temp. Range: -40°C - 140°C
Magn. Range [mT]: +-30 - +-100

Short Description

Note: HAL 880 is not recommended for new designs. HAL880-UT can be replaced by HAL 830 and HAL 880-DJ can be replaced by HAL 2420.

The HAL 880 is designed to fulfill the requirements of today’s state-of-the-art applications for linear and angular measurements that require flexibility to compensate system tolerances.
Due to its programmability, it also offers the additional advantage of compensation of system tolerances. This is mandatory for applications like accelerator pedal sensing, current measurement, bending light or head light adjustment . The sensor provides a linear, ratiometric analog output signal with implemented wirebreak detection working with pull-up or pull-down resistor.
Major characteristics like magnetic-field range, sensitivity, VOQ (output voltage at zero magnetic field) and the temperature coefficients can easily be adjusted to the magnetic circuit (linear and quadratic) by programming the non-volatile memory.
The HAL 880 is available in the leaded package TO92UT or in the SMD package SOIC8.

 

Block diagram – system architecture

The HAL 880 sensors are produced in a proven submicron CMOS technology.

The HAL 880 features a temperature-compensated Hall plate with choppered offset compensation, an A/D converter, digital signal processing, a push-pull output, an EEPROM memory with redundancy and lock function for the calibration data and the data register information, a serial interface for programming the EEPROM, and protection devices on all pins.

The HAL 880 is programmable by modulating the supply voltage. No additional programming pin is needed.

The internal digital signal processing is of great benefit because analog offsets, temperature shifts, and mechanical stress do not degrade the sensor accuracy.

https://www.micronas.com/sites/default/files/svg/circuit_diagram_HAL880.svgHAL 880
https://www.micronas.com/sites/default/files/fallback/1500px_circuit_diagram_HAL880.gifHAL 880

All products of this family

HAL 880

Package: TO92UT
Ordering Code: HAL 880UT-K
Interface : Analog, 3-Wire
Temp. Range: -40°C - 140°C
Magn. Range [mT]: +-30 - +-100